How to Resolve Green Light Flashing On My Roku Remote?

Roku remotes basically come in two types, the standard IR remote and the ‘Point-Anywhere’ remote. Most of us are accustomed to standard remotes that work with infrared sensors. The best part about ‘Point-Anywhere’ remotes are that they need not be placed directly facing the player to attend to commands. As the enhanced remote uses RF or radio frequencies, unlike the IR, it does not have to be in the straight line of sight with its parent device. While errors and troubles with the Roku Remote are rather uncommon, unless usage is extremely rough, there are times when you can wonder Why Is The Green Light Flashing On My Roku Remote.

Why Is The Green Light Flashing On My Roku Remote

Roku Remote won’t stop blinking

Some simple reasons why the Roku remote flashes the green light continuously:

  • The batteries are low and need replacement
  • Connection to the unit is severed and hence Roku remote blinking
  • The firmware is not updated or there is a bug in the firmware

Replacing batteries

  • Let the buttons face down as you flip the remote over. The end of the remote with the wrist strap should be closer to your hand.
  • Slide down the battery compartment cover with one hand while holding down the tab on the compartment with your other hand, to remove the batteries.
  • By placing a finger on one end of the battery and pushing downward while pulling it out, remove it from its compartment

Connection to the unit is lost

  • This is one of the most common answers to why is my Roku blinking, and a range of other issues as well
  • First, ascertain if you are appropriately connected to check Why Is The Green Light Flashing On My Roku Remote
  • To do this, check the cabling and if the Roku is indeed connected to the correct HDMI port.
  • It is also important that you determine the type of Roku that you are using.
  • Unplug the ends of the HDMI cable from both the TV and the player, wait for a while and then reseat them back again, this time, ensuring that they are firmly placed
  • If you are using a streaming stick, then you will insert it directly into the TV and ensure that it is securely connected
  • When you select the input/source, check the HDMI port number on the TV
  • Now, take the television’s remote to make a suitable selection to get the remote working

Updating firmware on the Roku

Most software and firmware updates on the have performed automatically. Generally, a software update issue occurs when the player has been disconnected; for too long or when you have downloaded a non-certified channel.

  • For all firmware and software updates, you can always check manually to bring it up to date
  • Press Home -> Settings -> System -> System Update -> Check Now
  • Any new software/firmware pending for an update will be reorganized immediately

Remote Factory Reset

If everything else fails, then perform a factory reset on the remote. For this, go to Settings -> Advanced System Settings -> Factory Reset. Thereafter, you have to enter the activation code, and set up the system, just like you did in the beginning.

If your Roku remote stopped working and want to know Why Is The Green Light Flashing On My Roku Remote then, connect with our agents immediately for a solution. Call us @ +1-805-273-0200

Leave a comment